Dometic/Cruisair Remote R Condenser Unit – 16,000 BTU’s – 115V – 60 Hz – R417A
R type remote condensing units are seawater-cooled, reverse-cycle heat pumps for cooling and heating in marine applications. Small R type units are available in capacities from 10,000 to 16,000 BTU/hr.
These condensing units can be installed with up to two Cruisair evaporating units, where the total capacity of the evaporators is equal to R type unit capacity. In cooling mode, full performance is available in seawater up to 90°F (32°C). In reverse-cycle heat mode, they will perform in seawater temperatures as low as 40°F (4.4°C).
R type units have a one-piece chassis/pan with a smaller footprint and two 1/2 in. (13 mm) drain connections. Hold-down brackets secure all four corners and allow for easier installation and removal. The one-piece electrical box with 3 ft. (0.9 m) harness can be remotely mounted. Additional service ports provide convenient charging and servicing.
Key benefits
- Service ports on refrigerant lines and base valves
- Compressor vibration-isolation mounts minimize noise and vibration
- Condensate drain pan with front and rear drain stems
- Corner mounting brackets for easier installation
- High-pressure switch (SMX control models also include low-pressure switch)
- Electrical box can be mounted remotely
- Environmentally safe R-417A refrigerant
- Ignition protected
- Additional vibration isolation kit available
- Charged, tested, and leak checked at the factory
Technical Specifications
- Capacity (BTU/h)
- 16000
- Voltage (V)
- 115
- Cycle (Hz)
- 60
- Phase (Ph)
- 1
- Full Load Amps (FLA) Cool (A)
- 11.5
- Full Load Amps (FLA) Heat (A)
- 13.5
- Locked Rotor Amps (LRA) (A)
- 75
- Refrigerant Type
- R417A
- Sound Level
- N/A
- Component Type
- Condensing Units
Dimensions
Max. Height (in/mm) | Width (in/mm) | Depth-With Electrical Box (in/mm) | Depth-Without Electrical Box |
12.5 / 318 | 12.2 / 310 | 17.1 / 435 | 13.6 / 346 |