Dometic/Cruisair Remote R Condenser Unit – 10,000 BTU’s – 230V – 60 Hz – R417A

R type remote condensing units are seawater-cooled, reverse-cycle heat pumps for cooling and heating in marine applications. Small R type units are available in capacities from 5,000 to 16,000 BTU/hr.

These condensing units can be installed with up to two Cruisair evaporating units, where the total capacity of the evaporators is equal to R type unit capacity. In cooling mode, full performance is available in seawater up to 90°F (32°C). In reverse-cycle heat mode, they will perform in seawater temperatures as low as 40°F (4.4°C).

R type units have a one-piece chassis/pan with a smaller footprint and two 1/2 in. (13 mm) drain connections. Hold-down brackets secure all four corners and allow for easier installation and removal. The one-piece electrical box with 3 ft. (0.9 m) harness can be remotely mounted. Additional service ports provide convenient charging and servicing.

Key benefits

• Service ports on refrigerant lines and base valves
• Compressor vibration-isolation mounts minimize noise and vibration
• Condensate drain pan with front and rear drain stems
• Corner mounting brackets for easier installation
• High-pressure switch (SMX control models also include low-pressure switch)
• Electrical box can be mounted remotely
• Environmentally safe R-417A refrigerant
• Ignition protected
• Additional vibration isolation kit available
• Charged, tested, and leak checked at the factory

Technical Specifications

Capacity (BTU/h)

10000

Voltage (V)

230

Cycle (Hz)

60

Phase (Ph)

1

Full Load Amps (FLA) Cool (A)

4.8

Full Load Amps (FLA) Heat (A)

5.7

Locked Rotor Amps (LRA) (A)

28

Refrigerant Type

R417A

Sound Level

N/A

Component Type

Condensing Units

Dimensions