Raymarine ACU-100 Autopilot Control Unit (Actuator Control Unit)
The Raymarine ACU-100 Autopilot Control Unit delivers reliable autopilot drive power and also provides power to the SeaTalk ng bus.
Specifications:
Supported Drives: Wheel, tiller and 0.5 ltr Hydraulic
Drive Current Output Maximum continuous 7 A at supply voltage
No Drive Clutch connection
Connections
Rudder reference sensor
Power
Drive motor
Ground
Nominal supply voltage: 12 Volts DC
Operating voltage range 10.8 Volts DC to 15.6 Volts DC
Power consumption (standby)
Main power supply: 300 mA (12 Volts DC)
No power supply to SeaTalk ng
Data connections: SeaTalk ng
Installation environment
Operating temperature: -20º C to +55º C (-4º F to +131º F)
Storage temperature: -30º C to +70º C (-22º F to +158º F)
Relative humidity: max 93%
Waterproof rating:
Connector panel: IPX2
Drive electronics: IPX6
Dimensions: (W x H x D) 180 mm x 140 mm x 52 mm (7.1 in x 5.5 in x 2.0 in)
Conformance: Europe: 2004/108/EC Australia and New Zealand: C-Tick, Compliance Level 2
Warranty On Raymarine ACU-100 Actuator Control Unit
*2 Year Standard Raymarine Warranty. Extend into 3 Year Warranty by Registering Product With Raymarine. Your Proof of Purchase documentation is important. Please keep it in a safe place. If you need a warranty service your proof of purchase will be required.
